the printer receives the fax. If the call is a voice call, the answering machine records the incoming
message.
The computer cannot receive faxes (HP Digital Fax)
●
The computer selected to receive faxes is turned o. Make sure the computer selected to receive faxes is
switched on at all times.
●
Dierent computers are congured for setup and receiving faxes and one of them may be switched o.
If the computer receiving faxes is dierent from the one used for setup, both computers should be
switched on at all times.
●
HP Digital Fax is not activated or the computer is not congured to receive faxes. Activate HP Digital Fax
and make sure the computer is congured to receive faxes.
Network and connection issues
What do you want to do?
Fix wireless connection
Choose one of the following troubleshooting options.
HP Print and Scan Doctor The HP Print and Scan Doctor is a utility that will try to diagnose and x the issue automatically.
NOTE: This utility is only available for Windows operating system.
Use an HP online
troubleshooting wizard
●
Troubleshoot your wireless problem, whether your printer has never been connected or it was
connected and is no longer working.
●
Troubleshoot a rewall or antivirus issue, if you suspect that it is preventing your computer from
connecting to the printer.
NOTE: The HP Print and Scan Doctor and the HP online troubleshooting wizards may not be available in all
languages.
Read general instructions in the Help for wireless troubleshooting
Check the network conguration or print the wireless test report to assist in diagnosing network connection
issues.
1.
From the printer control panel display, touch (Wireless), and then touch ( Settings ).
2. Touch Print Reports, and then touch Network Conguration Page or Wireless Test Report.
Find network settings for wireless connection
Choose one of the following troubleshooting options.
HP Print and Scan
Doctor
The HP Print and Scan Doctor is a utility that can tell you the network name (SSID) and password (network
key).
NOTE: This utility is only available for Windows operating system. The Windows computer you are
running the HP Print and Scan Doctor on should be connected to the network using a wireless connection.
120 Chapter 10 Solve a problem ENWW