HP office jet 6950 - Optimize Printing Supplies; Understand the printer parts

To turn Quiet Mode on or o from the Embedded Web Server (EWS)
1. Open the EWS. For more information, see Open the embedded web server .
2. Click the Settings tab.
3. In the Preferences section, select Quiet Mode , and then select On or O .
4. Click Apply.
To turn on Quiet Mode while the printer is printing
▲
On the printer control panel display, from the printing screen, touch (Quiet Mode) to turn on Quiet
Mode.
NOTE: Quiet Mode is turned on only after the current page is printed and is only used for the current print
job.
To create a schedule for Quiet Mode from the printer control panel
1. From the Home screen, touch Setup .
2. Touch Preferences .
3. Touch Quiet Mode.
4. Touch O next to Quiet Mode to turn it on, and then touch OK to conrm.
5. Touch O next to Schedule, and then change start time and end time of the schedule.
Optimize Printing Supplies
To optimize printing supplies such as ink and paper, try the following:
●
Recycle used original HP ink cartridges through HP Planet Partners. For more information, visit
www.hp.com/recycle.
●
Optimize paper usage by printing on both sides of the paper.
●
Change the print quality in the printer driver to a draft setting. The draft setting uses less ink.
●
Do not clean the printhead unnecessarily. Doing so wastes ink and shortens the life of the cartridges.
Understand the printer parts
This section contains the following topics:
●
Top and front view
●
Printing supplies area
●
Back view
ENWW Understand the printer parts 5