a. If you are loading an original printed in portrait orientation, place the pages so that the top edge of
the document goes in rst. If you are loading an original printed in landscape orientation, place the
pages so that the left edge of the document goes in rst.
b. Slide the paper into the document feeder until you hear a tone or see a message on the printer
control panel display indicating that the loaded pages were detected.
TIP: For more help on loading originals in the document feeder, refer to the diagram engraved in the
document feeder tray.
2. Slide the paper-width guides inward until they stop at the left and right edges of the paper.
Update the printer
By default, if the printer is connected to a network and Web Services has been enabled, the printer
automatically checks for updates.
To update the printer using the printer control panel
1.
On the printer control panel display, from the Home screen, swipe left to see ( Setup ) and touch
( Setup ).
2. Touch Tools.
3. Touch Update the Printer.
4. Touch Check Now.
To enable the printer to automatically check for updates
1.
On the printer control panel display, from the Home screen, swipe left to see ( Setup ) and touch
( Setup ).
2. Touch Tools.
3. Touch Update the Printer.
4. Touch Printer Update Options.
5. Touch Install Automatically (recommended) or Alert When Available.
18 Chapter 2 Get started ENWW
To Next Page
Loading...