2-32 Removal and Replacement HP Omnibook XE3 (Technology Codes GE and GD)
Removing the Floppy Disk Drive
(HP Authorized Service Providers Only)
Required Equipment
•
#0 Phillips screwdriver.
Removal Procedure
1.
Unplug the AC adapter, if present, and remove the battery.
•
Keyboard cover (page 2-10).
•
Keyboard (page 2-12).
•
Display assembly (page 2-18).
•
Top case (page 2-22).
•
Hinge saddle set (page 2-25).
2.
Release the drive’s ribbon cable from its connector on the motherboard.
3.
Remove the two retaining screws.
4.
Lift the floppy drive out of the notebook.
To Next Page
Loading...
