HP P2000 G3 User Manual

HP P2000 G3 SAS MSA System User Guide 69
Power cord requirements
Each enclosure equipped with AC power supply modules requires two AC power cords that are
appropriate for use in a typical outlet in the destination country. Each power cord connects one of the
power supply modules to an independent, external power source. To ensure power redundancy, connect
the two suitable power cords to two separate circuits; for example, to one commercial circuit and one
uninterruptible power source (UPS).

HP P2000 G3 Specifications

General

Model	P2000 G3
Category	Storage
Drive Support	SAS, SATA
Host Interface	iSCSI, Fibre Channel, SAS
Form Factor	2U
RAID Levels	0, 1, 5, 6, 10
Cache	2 GB
Drive Bays	12 (SFF), 24 (SFF), 12 (LFF)
Cache Memory	2GB per controller
Operating Temperature	10°C to 35°C
Power Supply	Redundant
Expansion Options	Disk Enclosures