Da e & Ti e
This setting allows you to setthe date/time format, as well as
the current date and time for the camera. This is usually done
when you first set up the camera; however, you may need to
re-set the date and time when you are travelling to different
time zones, or if the date and time is incorrect.
NOTE Thedate/time format chosenwill be used to display the
date information in Playback. Also, this format chosen in
this setting is what is used in the date & time imprint
feature (see Da_e& Tree Imprin_on page 67).
] In the Setup Menu (page 103), select Da_e& Time_
2 In the Da_e& Time sub-menu,
adjust the value of the highlighted
selection by using the A v
Buttons.
3 Pressthe _ _ Buttons to move to
the other selections.
4 Repeat steps 2 and 3 until the
correct date/time format, date, and time are set.
5 PressMenu/OK to save the setting and return to the Setup
Menu.
Thenew setting remains in effect until it ischanged again, even
when you turn the camera off.
Chapter 6: Using the Setup Menu 105
To Next Page
Loading...
