USB Configuration
Thissettingdetermines how the camera isrecognized when
connected to a computer.
"] In the Se'fupMenu (page 103),
select USB.
2 In the UBB Configuration
sub-menu, highlight one of these
two choices:
° Dgital Camera--Causes the
computer to recognize the camera
as a digital camera using the Picture Transfer Protocol (PTP)
standard. This is the default setting on the camera.
° Dsk Drive--Causes the computer to recognize the camera as a
disk drive using the Mass Storage Device Class (MSDC)
standard. Use this setting to transfer images to a computer that
does not have the HP Image Zone software installed on it (see
Transferring _magesto a Computer without HP Image Zone
Software on page 114). This setting may not work with a
Windows 98 computer that does not have the HP Image Zone
software installed on it.
3 Press Menu/OK to save the setting and return to the S_up
Menu.
The new setting remains in effect until if is changed again, even
when you turn the camera off.
106 HP Photosmart R507/R607 User's Manual
To Next Page
Loading...
