Using Panorama Mode
NOTE If the HP Image Zone software is not installed on your
computer, see Using 'four Camera without _nsfaIting the
HP _mage Zone $_ware on page 113.
?enomma mode allows you to take a sequence of 2-5 pictures
that can be "stitched" together in order to capture a scene too
wide to fit into a single picture, tn Panorama mode, you take a
picture as the first in the panoramic sequence, and each
subsequent picture you take is added to the panorama until
you end the sequence by pressing the Menu/OK button, or
until you have taken the fifth picture in the sequence. You can
then view a low-resolution image of your panorama with the
Previ_ Panorama Menu option in the Playback Menu (see
page 84), or you can transfer the images in the panoramic
sequence to your computer for stitching together and then
viewing or printing.
Your camera came with the ArcSoft_ Panorama Maker TM
software that automatically stitches the images in the
panoramic sequence together on your computer during image
transfer. The Panorama Maker software was automatically
installed on your computer during the HP Image Zone software
instaJJationprocess (see Ins_ellin9 _heSaffware on page 19).
To transfer the panoramic sequence of images from your
camera to your computer so that the ArcSoft Panorama Maker
software can stitch the images together, seeTransferring
Images _ae Computer on page 97.
48 HP Photosmart R507/R607 User's Manual
To Next Page
Loading...
