6 When the transfer screen on the computer says Finished or
Transfer Complete, you can disconnect the camera from the
computer.
Printing Panoramas
When a setof images marked as a panoramic sequence is
transferred to your computer with HP _mageTransfer, the
ArcSofl Panorama Maker application that was installed with
the HP _mageBne software on your computer automatically
stitchesthe images together to form a single panoramic image.
This panoramic image can then be printed from Panorama
Maker or from H? Image Zone.
Printing Panoramas from
Panorama Maker
To print a panoramic image from Panorama Maker:
] Start the ArcSoft Panorama Maker application installed on
your computer.
2 Click Open, and browse to the panoramic image file on
your computer's hard disk.
NOTE The panoramic image file name is the same as the
name of the last image in the panoramic sequence, with
"-P" added to the file name.
3 Click Print selecta printer, and specify the desired format
for printing the image.
Chapter 5: Transferring and Printing Images 99
To Next Page
Loading...
