Speakers
Description Spare part number
Speaker Kit (includes left and right speakers and cables) 740193-001
Before removing the speakers, follow these steps:
1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,
and then shut it down through the operating system.
2. Disconnect the power from the tablet by unplugging the power cord from the tablet.
3. Disconnect all external devices from the tablet.
4. Remove the display enclosure (see
Display enclosure on page 38).
5. Disconnect the tablet battery cable from the system board (see
Sensor board on page 39).
6. Remove the bezel (see
Bezel on page 57).
Remove the speakers:
1. Disconnect the speaker cable (1) from the system board.
2. Release the left speaker cable from the clips (2) built into the display panel assembly.
3. Remove the two Phillips PM1.85×3.35 screws (3) that secure the speakers to the display
panel assembly.
4. Remove the speakers (4).
Reverse this procedure to install the speakers.
Tablet component replacement procedures
59
To Next Page
Loading...
