Keyboard base component replacement procedures
CAUTION: Keyboard base components described in this chapter should only be accessed by
an authorized service provider. Accessing these parts can damage the keyboard base and void
the warranty.
This chapter provides removal and replacement procedures for authorized service provider only parts.
There are as many as 31 screws that must be removed, replaced, and/or loosened when servicing
the keyboard base. Make special note of each screw size and location during removal
and replacement.
Bottom cover
NOTE: The bottom cover includes rubber padding, shielding, and 5 rubber feet. The five rubber feet
are included in the Rubber Feet Kit, spare part number 740207-001.
Description Spare part number
For use only on HP Pro x2 410 G1 PC keyboard bases:
For use only on keyboard bases using a 65-W AC adapter 759017-001
For use only on keyboard bases using a 45-W AC adapter in South Korea and Taiwan 759018-001
For use only on HP Pavilion 11 x2 PC keyboard bases:
In flyer red finish 740195-001
In flyer red finish 757225-001
In pearl white finish 740196-001
In sparkling black finish 757224-001
In sparkling black finish 740185-001
Before disassembling the keyboard base, follow these steps:
1. Turn off the tablet and keyboard base. If you are unsure whether the tablet and keyboard base are
off or in Hibernation, turn the tablet on, and then shut it down through the operating system.
2. Disconnect the power from the tablet and keyboard base by unplugging the power cord from the
tablet and keyboard base.
3. Disconnect the tablet from the keyboard base.
Keyboard base component replacement procedures
69
To Next Page
Loading...
