HP ProCurve 3500-24 - Specifications-Interface Modules

32
HP ProCurve Switch zl 24-Port 10/100/1000 PoE Module (J8702A)
Description
This interface module has 24 10/100/1000Base-T ports that provide Gigabit-over-copper connectivity for
wiring closets, enabling high-density Gigabit connectivity to the desktop over Category 5 copper cabling. Each
port is capable of providing IEEE 802.3af compliant Power over Ethernet (PoE) to power IP phones, wireless
access points, and other devices. Pre-standard powered devices can also be supported.
Ports
IEEE Auto-MDI: yes
Duplex: half or full
Connectors: RJ-45
Description
This interface module has 20 10/100/1000Base-T ports that provide Gigabit-over-copper connectivity for
wiring closets, enabling high-density Gigabit connectivity to the desktop over Category 5 copper cabling. Each
port is capable of providing IEEE 802.3af compliant Power over Ethernet (PoE) to power IP phones, wireless
access points, and other devices.
In addition, this module provides 4 mini-GBIC ports for uplinks and intra-building connections. They can be
trunked to provide up to 4 Gigabits of connectivity. Two such modules can have their ports trunked across both
modules to provide module redundancy as well.
Ports
4 open mini-GBIC slots
IEEE Auto-MDI: yes
Duplex: half or full
Connectors: RJ-45
Mini-GBICs supported (ordered separately)
•J4858CHPProCurveGigabit-SX-LCMini-GBIC
•J4859CHPProCurveGigabit-LX-LCMini-GBIC
•J4860CHPProCurveGigabit-LH-LCMini-GBIC
Specifications—interface modules
The following is a description of the interface modules supported by the HP ProCurve Switch 5400zl and
8200zl series.
HP ProCurve Switch zl 20-Port 10/100/1000 + 4-Port Mini-GBIC Module (J8705A)