HP ProCurve 3500-24 - HP Procurve Switch 3500 Series

38
Description
The HP ProCurve MSM765zl Mobility Controller is a new blade controller that can coexist in the same chassis
as the Wireless Edge Services zl Module (WESM). Using PMM 3.0 with AU2, customers can have a complete
unified wired and wireless environment. It can support MSM access points (APs) that are 802.11 a/b/g/n
compliant without having to upgrade the controller.
NOTE
Use of the HP ProCurve MSM765zl Mobility Controller restricts the temperature specification for the 5400zl or
8200zl series switch to 50°C if all installed modules are on the left side of the chassis. If any installed module is
on the right side of the chassis, the temperature specification of the entire switch is limited to 40°C.
HP ProCurve MSM765zl Mobility Controller (J9370A)
NOTE
Use of the HP ProCurve Threat Management Services zl Module restricts the temperature specification for the
5400zl series switch to 50°C if all installed modules are on the left side of the chassis. If any installed module is
on the right side of the chassis, the temperature specification of the entire switch is limited to 40°C.
HP ProCurve Switch 3500 series
The HP ProCurve Switch 3500 series is another of the most advanced intelligent edge switches in the
HP ProCurve Networking product line. The Switch 3500 series includes three 24-port and three 48-port
stackables. The foundation of these switches is a purpose-built, programmable ProVision ASIC that allows the
most demanding networking features, such as QoS and security, to be implemented in a scalable yet granular
fashion.
The HP ProCurve Switch 3500yl-24G-PWR supports 24 Gigabit interfaces, and the HP ProCurve Switch
3500yl-48G-PWR supports 48 Gigabit interfaces. Four of the ports are dual-personality, where each port can
be used as either an RJ-45 10/100/1000 port (IEEE 802.3 Type 10Base-T; 802.3u Type 100Base-TX; 802.3ab
1000Base-T Gigabit Ethernet) or an open mini-GBIC slot (for use with mini-GBIC transceivers).
Both the 24 and 48 Gigabit interface models provide integrated PoE on all 10/100/1000Base-T ports. Both
models also have an expansion slot for an optional 4-port 10-GbE module. The 4-port 10-GbE line interface
module is installed in the back panel of the switch.
The HP ProCurve 3500-24 Switch supports 20 10/100 interfaces, and the HP ProCurve 3500-48 Switch
supports 44 10/100 interfaces. Four additional ports are dual-personality, where each port can be used
as either an RJ-45 10/100/1000 port (IEEE 802.3 Type 10Base-T; 802.3u Type 100Base-TX; 802.3ab
1000Base-T Gigabit Ethernet) or an open mini-GBIC slot (for use with mini-GBIC transceivers).
The HP ProCurve 3500-24-PoE Switch supports 20 10/100 interfaces, and the HP ProCurve 3500-48-PoE
Switch supports 44 10/100 interfaces. Four additional ports are dual-personality, where each port can be
used as either an RJ-45 10/100/1000 port (IEEE 802.3 Type 10Base-T; 802.3u Type 100Base-TX; 802.3ab
1000Base-T Gigabit Ethernet) or an open mini-GBIC slot (for use with mini-GBIC transceivers). Both models
provide integrated PoE on all 10/100Base-TX and 10/100/1000Base-T ports.