100
Enhancements
Release M.10.28 Enhancements
Release M.10.28 Enhancements
Software fixes only, no new enhancements.
Release M.10.29 Enhancements
Release M.10.29 includes the following enhancement:
■ Enhancement (PR_1000376626) — Enhance CLI "qos dscp-map he" help and "show dscp-
map" text to warn the user that inbound classification based on DSCP codepoints only occurs
if "qos type-of-service diff-services" is also configured.
Release M.10.30 Enhancements
Software fixes only, no new enhancements.
Release M.10.31 Enhancements
Release M.10.31 includes the following enhancement:
■ Enhancement (PR_1000372989) — This enhancement enables the user to set the oper-
ator/manager username/password via SNMP.
Password Command
The password command in the CLI is enhanced to support the following syntax:
Syntax:
[no] password <manager | operator | port-access> [user-name
<
name>
] <
hash-type
>
<
password>
Where:
■ manager configures access to the switch with manager-level privileges.
■ operator configures access to the switch with operator-level privileges.
■ port-access configures access to the switch through 802.1X authentication with operator-level
privileges.
■ user-name <name> is the (optional) text string of the user name associated with the password.
To Next Page
Loading...
Need help?
General