155
Software Fixes in Release M.08.51 - M.10.72
Release M.08.87
■ SNMP (PR_1000295753) — Removing 'public' SNMP community generates an empty
Event Log message.
Release M.08.87
Problems Resolved in Release M.08.87 (Not a general release)
■ Crash/STP (PR_1000307280) — Inconsistent or incorrect STP data may cause the switch
to crash with a message similar to:
Software exception at stp_mib.c:248 -- in 'mSnmpCtrl', task ID =
0x12d14b8\n-> ASSERT: failed.
■ Menu (PR_1000306213) — When using the Menu to create a trunk, the new trunk ports
will become disabled after a switch reboot.
■ OSPF (PR_1000280427) — OSPF MD5 Authentication failure.
■ RSTP (PR_1000309683) — Temporary routing or switching problems after RSTP is
disabled.
Release M.08.88
Problems Resolved in Release M.08.88 (Not a general release)
■ CLI (PR_1000310849) — Under a heavy load where packets received on a 10-Gigabit port
are dropped, the RX drop counter values decrease when they should increase.
■ LLDP (PR_1000310666) — The command "show LLDP" does not display information
learned from CDPv2 packets.
■ SNMP Traps (PR_1000285195) — Switch does not save the option to disable a Link up/
down SNMP trap after a switch reboot.
■ Web /Stacking (PR_1000308933) — Added Web User Interface stacking support for the
new Series 3500yl switches, providing a 3500yl "back-of-box" display when the 3400cl or
6400cl is stack commander and a 3500yl is a stack member.
Release M.08.89
Problems Resolved in Release M.08.89 (Never released)
■ Enhancements (PR_1000313819) — Added two enhancements:
• DNS Names for Ping and Traceroute
To Next Page
Loading...
Need help?
General