181
Software Fixes in Release M.08.51 - M.10.72
Release M.10.70
■ PC Phone/Authentication (PR_0000007209) — When an IP phone is used in tandem
with a PC connected to the phone, if the phone is moved to a tagged VLAN, some phone
manufactures send some traffic to the switch untagged. This may result in traffic disruption
including the PC not being allowed to authenticate.
■ CLI (PR_0000002815/1000406763) — Output from the show tech CLI command was
modified to include output from show access-list resources and show access-list radius all
commands.
■ DHCP Snooping (PR_0000009387) — The max-vlan configuration may result in a
different MAC address being used in switc- generated DHCP requests from non-default
VLANs versus the default VLAN. When DHCP-Snooping is globally enabled in this situation,
the DHCP server offers are dropped to the non-default VLANs.
■ PC Phone/Authentication (PR_0000010104) — When using an IP phone in tandem with
a PC, sometimes the VLAN assignment after authentication of the PC is delayed.
■ 802.1X (PR_0000010275) — For a port that is being authenticated via 802.1X, the user
fails authentication if the unauth vid value is configured.
■ CLI (PR_0000010942) — The CLI command output for show run does not display aaa port-
access <port#> when MAC-based authentication with mixed port access mode is configured.
Other show commands may also be affected.
■ CLI (PR_0000010378) — Session time (sec.) remains at zero in response to the CLI
command show port-access authenticator <port> session-counters; it should increment.
■ Enhancement (PR_0000010783b) — The CLI output for the show tech transceivers
command has been enhanced to be consistent with other platforms.
Release M.10.70
Problems Resolved in Release M.10.70 (Not a Public Release)
■ Config (PR_0000007953) — The config line spanning-tree instance <n> vlan <vid> is truncated
in some cases, causing loss of configuration after reload of the config file.
■ DHCP / DHCP Snooping (PR_0000008118) — Switches may be intermittently unable to
get an IP address via DHCP after enabling DHCP snooping.
■ Authentication (PR_0000012553) — The switch sends EAP supplicant packets with the
identity field truncated to 24 bytes after a reload.
To Next Page
Loading...
Need help?
General