To Next Page

To Previous Page

162

Software Fixes in Release M.08.51 - M.10.72

Release M.10.11

Problems Resolved in Release M.10.11

■ Crash (PR_1000336436) — A “get/put” operation on config file via SCP crashes the box

with an error message similar to:

Software exception at ssh_alarm.c:304 -- in 'mSshAlrm', task ID =

0x6132588 -> ASSERT: failed.

■ Transceiver (PR_1000349320) — CX4 ports lose configs; "show int config" shows an empty

slot rather than CX4.

Release M.10.12

Problems Resolved in Release M.10.12

■ Crash (PR_1000351261) — On bootup, the switch with a fixed CX4 card installed will

crash with the following message:

Software exception at gamma_xcvr_util.c:1018. Support: this fix is

QA only.

■ Crash (PR_1000348454) — Crash when a loop is formed on the network, with error

message:

NMI event SW:IP=0x002030b4 MSR:0x0000b032 LR:0x002030d4 Task='mMst-

pCtrl' Task ID=0x60d6060cr: 0x48000040 sp:0x060d5cc8xer:0x00000000

■ Crash (PR_1000350363) — Switch crashes when pinging any other HP switch that is being

rebooted, with the following message:

Software exception at cli_oper_action.c:986 -- in 'mSess1', task

ID = 0x62ff180 -> ASSERT: failed

■ Radius EAP (PR_1000334731) — PEAP/TLS Eap Types with IAS Radius Server fail to

authenticate.

Release M.10.13

Problems Resolved in Release M.10.13

■ Crash (PR_1000352922) — The switch may crash with a message similar to

Software exception at mstp_ptx_sm.c:118 -- in 'mMstpCtrl', task

ID = 0x8899e70.-> ASSERT: failed

■ Enhancement (PR_1000354065) — DHCP Protection enhancement for switch 3400.

HP ProCurve Series 3400cl User Manual

Questions and Answers: