26
Enhancements
Release M.08.78 Enhancements
Release M.08.78 Enhancements
Using Fastboot To Reduce Boot Time
The fastboot command allows a boot sequence that skips the internal power-on self-tests, resulting
in a faster boot time.
For example:
Release M.08.79 Enhancements
CLI Port Rate Display
Beginning with release M.08.79 the CLI “show interface [port list]” command includes the port rate
in the display. The rate displayed is the average for a period of 5 minutes, given in bps for 1G ports,
or in Kbps for 10G ports. You can also use the CLI command: show interface port-utilization to display
port-rate over a period of 5 minutes.
Syntax: [no] fastboot
Used in the global configuration mode to enable the fastboot
option. The no version of the command disables fastboot
operation.
Syntax: show fastboot
Shows the status of the fastboot feature, either enabled or
disabled.
ProCurve(config)# show fastboot
Fast Boot: Disabled
To Next Page
Loading...
Need help?
General