150
Software Fixes in Release M.08.51 - M.10.72
Release M.08.70
■ Port Security (PR_1000203984) — CLI port-security "mac-address" command will save
address above the limit.
■ SNMP (PR_1000212170) — The Switch transmits Warm and Cold Start traps with an agent
address of 0.0.0.0.
■ Spanning Tree (PR_1000214598) - The switch will not accept the spanning-tree 1 mode
fast command within the CLI.
■ System Hang (PR_1000200341) - Added an exception handler to prevent a case where
the system may hang.
■ XRRP (PR_1000217922) — XRRP router may fail back to the XRRP peer router even with
Infinite Failback enabled.
Release M.08.70
Problems Resolved in Release M.08.70 (Not a general release)
■ ACL (PR_1000213663) — When configuring ACLs, the Switch incorrectly reports:
Duplicate access control entry.
■ Broadcast throttling (PR_1000240494) — Broadcast throttling does not work correctly
on Gigabit/second and 10-Gigabit/second ports.
■ Mesh (PR_1000218463) — If a mesh link goes down and a redundant (xSTP) link external
to the mesh goes into a forwarding state, connectivity across the mesh may be lost for a
previously learned MAC address.
■ MIB (PR_1000236875) — The switch is reporting etherType/size errors as part of
“ifInDiscards,” but the packets are not really dropped.
■ Packet buffers (PR_1000237366) — Improved packet buffer allocation for better data
handling.
■ Self-test (PR_1000239302) — The Switch reports a false self-test failure when a J8436A
SR transceiver is installed in Port B of a J8435A 10-GbE Media Flex module.
■ Web/Stack Mgmt (PR_1000239924) — As an IP Stack Management Commander, the
Switch does not display the device view (back of box) for a 2626 switch that is a member.
Release M.08.71
Problems Resolved in Release M.08.71 (Never released)
■ Crash (PR_1000232283) — The switch may crash with a message similar to:
Software exception at fileTransferTFTP.c:182 -- in 'mftTask', task ID = 0x107ee0.
To Next Page
Loading...
Need help?
General