HP ProDesk 400 G5 Desktop Mini User Manual

Speaker
A single speaker is located on the left side of the computer behind the front bezel, inside the chassis. It is
secured by a white peg that you pull out to release.
To remove the speaker:
1. Prepare the computer for disassembly (Preparation for disassembly on page 15).
2. Remove the access panel (Access panel on page 16).
3. Disconnect the speaker cable from the system board connector (1).
4. From the front of the computer, remove the Phillips screw that secures the speaker to the chassis (2).
5. Remove the insulator and tape from the top and inside of the speaker (3).
6. Lift the speaker straight up and out of the bracket on the inside of the chassis (4).
To install the speaker, reverse the removal procedures.
Speaker 19

HP ProDesk 400 G5 Desktop Mini Specifications

General

Chipset	Intel Q370
Memory	Up to 32 GB DDR4-2666 SDRAM
Operating System	Windows 10 Pro
Power Supply	65 W external power adapter
Processor	Core™ i3, Core™ i5, Core™ i7 (8th Gen)
Storage	Up to 2 TB HDD
Graphics	Intel UHD Graphics 630
Form Factor	Desktop Mini
Ports (Front)	1x headphone/microphone combo; 2x USB 3.1 Gen 1
Ports (Rear)	2x USB 2.0; 2x USB 3.1 Gen 1
Dimensions	177 x 175 x 34 mm
Weight	1.26 kg
Network	Gigabit Ethernet
Wireless	Bluetooth 5.0