HP ProDesk 400 G5 Desktop Mini User Manual

3. Tilt the fan up using the front tab and leave it in the up position.
NOTE: It is not necessary to fully remove the fan to remove or install a memory module.
4. Locate the memory module locations (1) and (2) on the system board.
5. To remove a memory module, press outward on the two latches on each side of the memory module (1),
and then pull the memory module (2) out of the slot.
The computer automatically recognizes the new memory when you turn on the computer.
30 Chapter 4 Removal and replacement procedures

HP ProDesk 400 G5 Desktop Mini Specifications

General

Chipset	Intel Q370
Memory	Up to 32 GB DDR4-2666 SDRAM
Operating System	Windows 10 Pro
Power Supply	65 W external power adapter
Processor	Core™ i3, Core™ i5, Core™ i7 (8th Gen)
Storage	Up to 2 TB HDD
Graphics	Intel UHD Graphics 630
Form Factor	Desktop Mini
Ports (Front)	1x headphone/microphone combo; 2x USB 3.1 Gen 1
Ports (Rear)	2x USB 2.0; 2x USB 3.1 Gen 1
Dimensions	177 x 175 x 34 mm
Weight	1.26 kg
Network	Gigabit Ethernet
Wireless	Bluetooth 5.0