HP ProDesk 680 G3 MT User Manual

b. Insert the new battery and position the clip back into place.
NOTE: After the battery has been replaced, use the following steps to complete this procedure.
8. Replace the access panel.
9. Plug in the computer and turn on power to the computer.
10. Reset the date and time, your passwords, and any special system setups using Computer Setup.
11. Lock any security devices that were disengaged when the access panel was removed.
115

HP ProDesk 680 G3 MT Specifications

General

Brand	HP
Model	ProDesk 680 G3 MT
Category	Desktop
Language	English