HP ProDesk 680 G3 MT User Manual

Dust lter
1. Prepare the computer for disassembly (see Preparation for disassembly on page 20).
2. Remove the access panel (see Access panel on page 21).
3. Stand the computer upright with the front facing toward you.
4. Detach the dust lter from the front of the computer.
Reverse this procedure to install the dust lter.
22 Chapter 4 Removal and replacement procedures

HP ProDesk 680 G3 MT Specifications

General

Brand	HP
Model	ProDesk 680 G3 MT
Category	Desktop
Language	English