HP ProDesk 680 G3 MT User Manual

Front bezel
1. Prepare the computer for disassembly (see Preparation for disassembly on page 20).
2. Remove the access panel (see Access panel on page 21).
3. Position the computer in the horizontal mode with the front facing toward you.
4. Release the three tabs (1) on the top of the front bezel from the computer chassis.
5. Swing the top edge of the front bezel (2) away from the computer chassis.
6. Remove the front bezel.
Reverse this procedure to install the front bezel.
Front bezel 23

HP ProDesk 680 G3 MT Specifications

General

Brand	HP
Model	ProDesk 680 G3 MT
Category	Desktop
Language	English