System battery replacement 112
WARNING: Do not exert too much force to remove the system battery. The battery could pop out
of the socket, or the tool could slip and damage the socket or the system board.
IMPORTANT: Replacing the system board battery resets the system ROM to its default
configuration. After replacing the battery, use BIOS/Platform Configuration (RBSU) in the UEFI
System Utilities ("HP UEFI System Utilities" on page 101) to reconfigure the system.
To replace the component, reverse the removal procedure.
For more information about battery replacement or proper disposal, contact an authorized reseller or an
authorized service provider.
To Next Page
Loading...
