HP ProLiant DL160 Gen9 - DIMM Slot Locations; System Maintenance Switch

Component identification 13
Item Description
27
10-pin RPS connector
28
System battery
29
NMI header
30
TPM connector
31
Secondary PCIe riser board connectors*
32
System maintenance switch
33
FlexibleLOM sideband signal connector
* For more information on the riser board slots supported by the onboard PCI riser connectors, see "PCIe riser
board slot definitions (on page 11)."
DIMM slot locations
DIMM slots are numbered sequentially (1 through 8) for each processor. The supported AMP modes use the
letter assignments for population guidelines.
System maintenance switch
Position Default Function
S1
Off Off = iLO 4 security is enabled.
On = iLO 4 security is disabled.
S2
Off Off = System configuration can be
changed.
On = System configuration is locked.
S3
Off Reserved
S4
Off Reserved
S5
Off Off = Power-on password is enabled.
On = Power-on password is disabled.
S6
Off Off = No function
On = ROM reads system configuration
as invalid.