Operations 23
Install the PCI riser cage
CAUTION: To prevent damage to the server or expansion boards, power down the server, and
disconnect all power cords before removing or installing the PCI riser cage.
To install the component:
1. If necessary, connect all required internal cabling to existing expansion boards. For more information
on these cabling requirements, see the documentation that ships with the option.
2. Align the PCI riser boards with the corresponding connectors on the system board, and then press down
the PCI riser cage.
o Primary PCI riser cage
o Secondary PCI riser cage
3. Install the access panel (on page 21).
4. Install the server into the rack ("Installing the server into the rack" on page 29).
To Next Page
Loading...
