Hardware options installation 50
d.
Connect the 24-pin power supply cable to the system board.
e. Ensure that the battery cable is underneath the DIMM guard.
10. Install the access panel (on page 21).
11. Install the server into the rack ("Installing the server into the rack" on page 29).
12. Power up the server (on page 17).
Optical drive option
For more information about product features, specifications, options, configurations, and compatibility, see
the product QuickSpecs on the HP website (http://www.hp.com/go/qs).
To install the component:
1. Power down the server (on page 17).
2. Remove all power:
To Next Page
Loading...
