Hardware options installation 40
3.
Prepare the drive.
4. Install the drive.
5. Determine the status of the drive from the drive LED definitions ("HP SmartDrive LED definitions" on page
15).
6. If removed, install the security bezel ("Security bezel option" on page 36).
To configure arrays, see the HP Smart Storage Administrator User Guide on the HP website
(http://www.hp.com/go/smartstorage/docs).
Drive cable options
Use these drive cable options to install an HP Host Bus Adapter or an HP Smart Array Controller board
option.
For more information about product features, specifications, options, configurations, and compatibility, see
the product QuickSpecs on the HP website (http://www.hp.com/go/qs).
Mini-SAS cable options
This section describes how to connect the Mini-SAS cables in the following drive configurations.
Drive configuration Storage controller options Expansion slot
Four-bay LFF
H240 or P440 Slot 2—Low-profile
Slot 3—Low profile, cannot support
H240/P440
To Next Page
Loading...
