Processor and memory board configuration / logical (physical) location
Upper processor memory board is shown on the left. Lower processor memory board is shown on
the right.
Hard drive LEDs
DescriptionItem
Fault/UID LED (amber/blue)1
Online LED (green)2
Hard drive LED combinations
InterpretationFault/UID LED (amber/blue)Online/activity LED (green)
The drive has failed, or a predictive
failure alert has been received for this
Alternating amber and blueOn, off, or flashing
drive; it also has been selected by a
management application.
The drive is operating normally, and it
has been selected by a management
application.
Steadily blueOn, off, or flashing
A predictive failure alert has been
received for this drive.
Amber, flashing regularly (1 Hz)On
Replace the drive as soon as possible.
The drive is online, but it is not active
currently.
OffOn
Do not remove the drive. Removing a
drive may terminate the current
operation and cause data loss.
Amber, flashing regularly (1 Hz)Flashing regularly (1 Hz)
The drive is part of an array that is
undergoing capacity expansion or
stripe migration, but a predictive failure
alert has been received for this drive.
To minimize the risk of data loss, do
not replace the drive until the expansion
or migration is complete.
Hard drive LEDs 87
To Next Page
Loading...
