HP ProLiant DL980 G7 - System Maintenance Switch

System maintenance switch
The system maintenance switch (SW1) is an eight-position switch that is used for system
configuration. The default position for all eight positions is Off.
FunctionDescriptionPosition
Off = iLO3 security is enabled.iLO3 securityS1
On = iLO3 security is disabled.
Off = System configuration can be
changed.
Configuration lockS2
On = System configuration is locked.
ReservedReservedS3
ReservedReservedS4
Off = No functionPassword protection overrideS5
On = Clears power-on password and
administrator password
Off = NormalInvalidate configurationS6
On = Clears NVRAM
ReservedReservedS7
ReservedReservedS8
System board components 95