HP ProLiant ML350 Gen9 - Systems Insight Display Leds

Component identification 83
3.
After the display fully ejects, rotate the display to view the LEDs.
For descriptions of the Systems Insight Display LEDs, see "Systems Insight Display LEDs (on page 83)."
Systems Insight Display LEDs
The HPE SID LEDs represent the system board layout. To view the LEDs, see "Using the Systems Insight
Display (on page 82)."
Item
Description
Status
1
Power cap
Green = Power cap applied
Amber = Power not available
Off = Standby on not configured
2
AMP Status
Green = AMP mode enabled
Amber = Failover or invalid configuration
Off = AMP mode disabled