HP ProLiant ML350 Gen9 - Device Numbering

Component identification 90
Connector
Description
2
GPU Power cable connector (optional)
3
Drive boxes 1,2,3 backplane power cable connector
4
Drive boxes 4,5,6 backplane power cable connector
5
2x4 System board power cable connector
6
2x12 System board power cable connector
7
2x20 System board signal cable connector
8
GPU Power cable connector (optional)
9
GPU Power cable connector (optional)
Device numbering
With optional drive cages installed, the server supports up to 48 SFF drives or up to 24 LFF drives. The
server does not support mixing SFF and LFF drives.
Hewlett Packard Enterprise recommends that you populate drive bays starting with the lowest SAS or
SATA device number. Drives are numbered from left to right or bottom to top in each component box.
• 48 SFF drives
o Tower orientation