HP PS1810 User Manual

3-8
Network Setup
Daylight Saving Time
Table 3-4. Daylight Saving Time Fields
■ Click Apply to save any changes for the current boot session; the changes take effect
immediately.
■ Click the Refresh link above the page to re-display the page with current settings from the
switch.
To view a summary of clock and DST information, click Status > Clock in the navigation pane.
Field Description
Daylight Saving Time Select how DST will operate:
•
Disabled—No clock adjustment will be made for DST.
•
Recurring—The settings will be in effect for the upcoming period and subsequent years.
•
Non-Recurring—The settings will be in effect for only one period (i.e., they will not carry
forward to subsequent years).
Start Time settings /
End Time settings
Set the following to indicate when the change to DST occurs and when it ends.
When Recurring is selected as the DST mode, the following fields display:
•
Week—Set the week of the month, from 1 to 5, when the change to/from DST occurs.
•
Day—Set the day of the week when the change to/from DST occurs.
•
Month—Set the month when the change to/from DST occurs.
•
Hours—Set the hour of the day when the change to/from DST occurs.
•
Minutes—Set the minutes in the hour when the change to/from DST occurs.
When Non-Recurring is selected as the DST mode, the following fields display:
•
Month—Set the month when the change to/from DST occurs.
•
Date—Set the day of the month when the change to/from DST occurs.
•
Year—Set the year in which these settings will take effect.
•
Hours—Set the hour of the day when the change to/from DST occurs.
•
Minutes—Set the minutes in the hour when the change to/from DST occurs.
Offset Specify the time amount of time in minutes to advance the clock during DST.

HP PS1810 Specifications

General

Brand	HP
Model	PS1810
Category	Switch
Language	English