11-3
Servers
Monitor Servers
Table 11-2. Discovered Servers Fields
■ Click Apply under the Discovered Servers List to add a discovered server.
Add Servers Manually
Use the Add Server drop-down list on the Monitor Servers page to select this option to add and monitor
an iLO enabled server by manually entering the server's IP address. An IP address is valid if it is within
the range defined in the Advanced Configuration page. For more information, see “Advanced Config-
uration” on page 7-4.
Figure 11-3. Manually Add Servers Options
Table 11-3. Manually Add Servers Fields
■ Click Apply under the Add New Server to Monitored List to add the specified server.
Example—Adding a Server Manually
Follow these instructions to add a new server manually to the monitored servers list.
1. Click Servers > Monitor Servers in the navigation pane to display the Monitor Servers page.
Field Description
Discovered Servers
Server Product Name Discovered server name.
Server: iLO IP Address IP address of the discovered server.
Add Select to add server. Click Apply to add the marked server.
Field Description
Server IP Address Enter the IP address of the server you wish to add manually. Use the dotted decimal notation
(for example, 192.168.2.10).
To Next Page
Loading...
Need help?
General
