8-2
Link Layer Discovery Protocol (LLDP)
LLDP Configuration
Table 8-1. LLDP Configuration Fields
Click Apply to save any changes for the current boot session; the changes take effect immediately.
Field Description
Global Mode
Transmit Interval Specify the interval at which frames are transmitted. The default is 30 seconds, and the
valid range is 5–32768 seconds.
Transmit Hold Specify the multiplier on the transmit interval to, which is used to compute the TTL (range
2–10, default = 4).
Re-Initialization Delay Specify the delay before a re-initialization (range 1–10 seconds, default = 2).
Notification Interval Specify a limit for the transmission of notifications (range 5–3600 seconds, default = 5).
Interface Mode
Interface The list of all physical and trunk interfaces on the system.
Transmit Enable Enable or disable the transmission of LLDP PDUs. The default is enabled.
Receive Enable Enable or disable the ability of the port to receive LLDP PDUs. The default is enabled.
Enable Notification Enable to have LLDP generate a log file entry.
Transmit Mgmt Info Enable or disable the transmission of management information with the LLDP PDUs. The
default is enabled.
To Next Page
Loading...
Need help?
General
