HP R110 - Page 60

60 Wireless configuration
Session Key Interval
Enter the interval at which the router refreshes session (unicast) keys for each client associated
with the VAP interface. To enable session key refreshing, specify a value in the range of 60 to
86400 seconds. Specify a value of 0 to disable session key refresh.
WPA2-PSK
If your network does not have a RADIUS server, select the WPA2 preshared key (PSK) option.
The WPA2-PSK security option is typically used for home or small business networks.
WPA2-PSK security includes the following settings:
Authentication Mode
Select WPA2-PSK to display all settings for WPA2-PSK security.
Encryption Type
AES is the specified encryption for WPA2-PSK. All wireless clients must be capable of
supporting AES encryption to be able to associate with the router.
Key Type
The WPA preshared key can be input as an ASCII string (an easy-to-remember form of letters
and numbers that can include spaces) or Hexadecimal format.
• Hexadecimal: Enter exactly 64 Hexadecimal characters (characters 0-9, a-f, and A-F).
• ASCII: Enter 8-63 characters (alphanumeric characters 0-9, a-z, and A-Z, plus spaces and
symbols).
Passphrase
Enter the key according to the type selected; in ASCII passphrase style (8-63 alphanumeric
characters), or in exactly 64 Hexadecimal characters. For an ASCII key, HP recommends that
the key be at least 20 characters long, and be a mix of letters and numbers. The passphrase
key cannot begin or end with spaces.
Group Key Interval
Enter the interval at which the broadcast (group) key is refreshed for clients associated with this
VAP interface (the default is 3600 seconds). The valid range is 60 to 86400 seconds. Specify
a value of 0 to disable the refreshing of broadcast keys.
Session Key Interval
Enter the interval at which the router will refresh session (unicast) keys for each client associated
with the VAP interface. To enable session key refreshing, specify a value in the range of 60 to
86400 seconds. Specify a value of 0 to disable session key refresh.