EasyManua.ls Logo

HP R110 - Page 96

HP R110
142 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
96 Firewall configuration
This page includes the following settings:
Enable
Enables the SPI features on the router.
Connection Policy
Fragmentation half-open wait: Configures the number of seconds that a packet state
structure remains active. When the timeout value expires, the router drops the un-assembled
packet, freeing that structure for use by another packet.
TCP SYN wait: Defines how long the software waits for a TCP session to synchronize
before dropping the session.
TCP FIN wait: Specifies how long a TCP session is maintained after the firewall detects a
FIN packet.
TCP connection idle timeout: The length of time for which a TCP session is managed if
there is no activity.
UDP session idle timeout: The length of time for which a UDP session is managed if
there is no activity.
H.323 data channel timeout: The length of time for which an H.323 session is
managed if there is no activity.

Table of Contents

Related product manuals