Table 16 Minimum Required HP-UX Versions for Smart Array SAS RAID Controllers (continued)
Minimum Required VersionOperating SystemController
Not supported.HP-UX 11i v2Smart Array P411
B.11.31.1005HP-UX 11i v3
B.11.23.0903HP-UX 11i v2Smart Array P700m
B.11.31.0903HP-UX 11i v3
Not supported.HP-UX 11i v2Smart Array P711m
B.11.31.1109HP-UX 11i v3
B.11.23.0712HP-UX 11i v2Smart Array P800
B.11.31.0712HP-UX 11i v3
Not supported.HP-UX 11i v2Smart Array P812
B.11.31.1005HP-UX 11i v3
For information about the supported server models and HP-UX versions, see the HP Smart
Array RAID Controllers Support Matrix at http://www.hp.com/go/hpux-iocards-docs.
Click the link for your HP-UX version. Support Matrix documents are listed alphabetically in
the “General reference” section.
2. Read the RAID-01 (ciss) HP Smart Array Controller Release Notes for your HP-UX version to
check for any known problems, required patches, or other information needed for installation.
3. Make sure you have superuser (root) privileges.
4. Make sure the /usr/sbin, /sbin, and /usr/bin directories are in your PATH statement,
by logging in as root and entering the following command:
# echo $PATH
Downloading software
To locate and download the drivers, utilities, and manpages for the Smart Array series controllers:
1. Go to http://www.software.hp.com.
2. Search for RAID-01.
3. Click Receive for Free.
4. Sign in with your HP Passport account credentials, or create a new account.
5. In the Software Specifications section, select the HP-UX version that your system runs; then
complete the required registration information, then click Next.
6. Click the depot that corresponds with the OS you are running to download the drivers, utilities,
and manpages for the Smart Array Controllers.
7. In the Documents column next to the Download Software column, click Download/Installation
Instructions to view instructions for using the swinstall tool to install the drivers, utilities,
and manpages.
Installing software
The drivers, utilities, and manpages for the Smart Array Series Controllers are contained in the
RAID-01 bundle located in the downloaded depot. See “Downloading software” (page 24). Follow
the procedure in the Download/Installation Instructions to verify the download and install the
bundle.
24 Installing the controller