HP StorageWorks iSCSI Feature Pack User Guide 18
(from the
Active Sessions
tab) and then log on (from the
Available Targets
tab). This
will temporarily disconnect the host.
NOTE: In order for an existing host to access this newly assigned LU, you will have to take
operating system-specific actions in order for the host to see the new storage. For
example, with Windows you must rescan disks via the system’s Computer Management
(available through the Control Panel). You will then need to write a signature, create a
partition, and format the drive so that the host can use it.
Viewing Logical Unit Properties
You can view the configuration of a LU or change the LU’s name. To do this:
1. On the
Logical Units
screen, click the checkbox to the left of the LU whose properties
you want to view.
2. Click
Properties
.
3. If you want to change the LU’s name, type a new name in the box and click
OK
.
Deleting Logical Units
You can delete one or more LUs. All data on the LU will be deleted and the space occupied
by the LU will become available for a new LU.
NOTE: You should not delete a LU if a host is attached to it.
To delete a LU:
1. On the
Logical Units
screen, click the checkbox(es) to the left of the LU(s) you want to
delete.
2. Click
Delete.
3. Click
OK
to confirm the deletion.
To Next Page
Loading...
Need help?
General
