HP StorageWorks 2000s - Logical Unit Commands

HP StorageWorks iSCSI Feature Pack User Guide 37
Logical Unit Commands
LUs are devices used by the iSCSI hosts.
The operation class name is:
logicalunit or lu
Under the LU operational class you can specify the following sub-operations:
create
Create a new LU .
Examples:
iscsicli lu create lu=LU4 pool=Pool1 size=1024 host=MySQLServer
accessmode=RO
iscsicli lu create lu=LU4 disk=0:2:2:2 size=1024 host=MySQLServer
accessmode=RW
import
Import a physical device as a new LU.
Parameter Type Description
LU R Name of the new LU.
Pool or Disk R Pool or Disk to provide storage for the LU.
Size O Size (in MB) of the new LU.
Default: available space
Host O Host to assign to the LU.
AccessMode O Type of access to grant to hosts.
Choices: RO, RW, RWE
Default: RWE
Parameter Type Description
LU R Name of the new LU.
Device R The physical device to import. The format is:
adapter:bus:target:lun
The storage must have been previously formatted by a supported
operating system.
Pool or Disk R Pool or Disk to store the header information for the imported physical
device.
Host O Host to assign the LU.