HP StorageWorks iSCSI Feature Pack User Guide 23
3. To add a new portal, click
Add,
select an IP address and enter a port number and port
group.
You cannot change a portal; You can remove and then add a portal.
4. To delete a portal, click the checkbox to the left of it and click
Remove
.
Viewing Host
To view the configuration of a host or change the authentication type or host resolution:
1. On the
Host
screen, click the checkbox to the left of the LU whose properties you want
to view.
2. Click
Properties
.
3. If you want to change the authentication type, select it and then enter the appropriate
username(s) and secret(s).
NOTE: You cannot change the authentication type while the host is connected to a LU.
4. If you want to change how this host should connect to the server, select the resolution
method.
Deleting Hosts
You can delete one or more hosts. Any LU assignment to this host will be lost (but the data
on the LUs themselves remains intact). If you decide to re-create the host at a later time, you
will have to re-assign LUs to it.
NOTE: You should not delete a host if it is attached to a LU.
To delete a host:
1. On the
Host
screen, click the checkbox(es) to the left of the host(s) you want to delete.
2. Click
Delete.
3. Click
OK
to confirm the deletion.
To Next Page
Loading...
Need help?
General
