HP StorageWorks 2000s User Manual

HP StorageWorks iSCSI Feature Pack User Guide 33
Example:
iscsicli host create host=MyServer initiator=iqn.1991-
05.com.microsoft:myserver authmode=chap user=user1 chap=secret
ResolveBy=address
delete
Remove a defined host.
Example:
iscsicli host delete host=MyServer
add
Add an iSCSI initiator to a host.
Example:
iscsicli host add host=MySQLServer initiator=iqn.1991-
05.com.microsoft:mysqlserver
AuthMode O Authentication mode used by this host.
Choices: none, chap, mutualchap
Default: none
User C User name for chap and mutual chap authentication type.
Chap C Server/Target Chap secret for chap and mutual chap authentication
type.
MutualChap C Initiator/Host MutualChap secret for mutual chap authentication
type.
ResolveBy O How the host should connect to the server.
Choices: address, name
Default: address
dnsname C DNS server name.
Parameter Type Description
Host R Name of the host.
Parameter Type Description
Host R Name of the host.
Initiator R iSCSI initiator name to add.
Parameter Type Description

HP StorageWorks 2000s Specifications

General

Form Factor	2U
Drive Bays	12
Drive Description	SAS or SATA
RAID Levels	0, 1, 5, 6, 10
Management Software	HP StorageWorks Modular Smart Array (MSA) management software
Power Supply	Redundant power supplies
Warranty	3 years
Operating Temperature	5°C to 35°C (41°F to 95°F)