HP StorageWorks 8/20q Installation And Reference Guide

76
Factory SNMP configuration
Enter the show setup snmp CLI command to display SNMP configuration values.
Factory switch services configuration
Enter the show setup services CLI command to display switch service configuration values.
Table 21 SNMP configuration defaults
Parameter Default
SNMPEnabled True
Contact <syscontact undefined>
Location <sysLocation undefined>
Description HP StorageWorks 8/20q Fibre
Channel Switch
ObjectID 1.3.6.1.4.1.3873.1.11
AuthFailureTrap False
ProxyEnabled True
SNMPv3Enabled False
Trap [1-5] Address Trap 1: 10.0.0.254
Traps 2–5: 0.0.0.0
Trap [1-5] Port 162
Trap [1-5] Severity Warning
Trap [1-5] Version 2
Trap [1-5] Enabled False
Table 22 Services configuration defaults
Parameter Default
TelnetEnabled True
SSHEnabled False
GUIMgmtEnabled True
SSLMgmtEnabled False
EmbeddedGUIEnabled True
SNMPEnabled True
NTPEnabled False
CIMEnabled True
FTPEnabled True
MgmtServerEnabled True
CallHomeEnabled True

HP StorageWorks 8/20q Specifications

General

Brand	HP
Model	StorageWorks 8/20q
Category	Switch
Language	English