HP StorageWorks 8/20q

HP StorageWorks 8/20q Fibre Channel Switch Installation and Reference Guide 79
Factory RADIUS configuration
Enter the show setup radius CLI command to display RADIUS configuration values.
Factory security configuration
Enter the show config security CLI command to display security configuration values.
Table 29 RADIUS configuration defaults
Parameter Default
DeviceAuthOrder Local
UserAuthOrder Local
TotalServers 0
DeviceAuthServer False
UserAuthServer False
AccountingServer False
ServerIPAddress 10.0.0.1
ServerUDPPort 1812
Timeout 2 seconds
Retries 0
SignPackets False
Table 30 Security configuration defaults
Parameter Default
AutoSave True
FabricBindingEnabled False
PortBindingEnabled False