PSM Error Codes
162 NAS 1000s Administration Guide
0xC000010A PSM was told to shut down.
Action: Save the system eventlog and contact technical support.
0xC0000184 Something has gone wrong with PSM.
Action: Save the system eventlog and contact technical support.
0xC0000185 An error occurred on the device.
Action: Save the system eventlog and contact technical support.
0xC0000206 Buffer size supplied is insufficient to hold requested information.
Action: Save the system eventlog and contact technical support.
0xE0001001 PSM could not start due to the server being constantly busy for minutes.
Action: Take a snapshot when the system demands are lower.
0xE0001002 PSM detected a deadlock.
Action: Check what other filter drivers you are running (i.e., virus scanners,
etc.) Save the system eventlog and contact technical support.
0xE0001003 Specified volume not active or deleted.
Action: Do not delete volumes with active snapshots.
0xE0001004 PSM was specified for a volume that is currently not being PSM'ed.
Action: Save the system eventlog and contact technical support.
0xE0001005 Cache file overflow caused all existing snapshots to be deleted.
Action: Increase the cache file size in Windows 2000 for NAS
(Disks/Persistent Storage Manager), or take/schedule snapshots when fewer
users are online.
0xE0001006 The application tried to enable PSM without first calling Psm_Register.
Action: Programmatically, a program must register with PSM prior to
sending it commands.
0xE0001007 Invalid license code.
Action: Contact vendor for a valid license.
0xE0001008 Another application already has PSMed locked exclusively.
Action: Save the system eventlog and contact technical support.
0xE0001009 PSM needs to be locked exclusive for this function to work.
Action: Save the system eventlog and contact technical support.
0xE000100A Wrong version of the driver has been loaded on this system.
Action: Verify the PSM version, save the system eventlog and contact
technical support.
0xE000100B A reboot is required before PSM can operate.
Action: Reboot the machine, and try taking a snapshot again. If this still
fails, save the system eventlog and contact technical support.
0xE000100C PSM is not installed.
Action: Save the system eventlog and contact technical support.
0xE000100D An incompatible DLL from another version of PSM is already loaded.
Action: Verify the PSM version, save the system eventlog and contact
technical support.
0xE000100E Out of memory.
Action: Close unnecessary applications or add more memory.
Table 5: PSM Error Codes
Error Code Description
To Next Page
Loading...
