PSM Error Codes
161NAS 1000s Administration Guide
0xC0000005 An Access Exception occurred.
Action: Save the system eventlog and contact your vendor's technical
support.
0xC0000008 User performing PSM function without opening PSM.
Action: Save the system eventlog and contact technical support.
0xC000000D An invalid parameter was passed to a function.
Action: Save the system eventlog and contact technical support.
0xC000000E Device name is not recognized by PSM.
Action: Save the system eventlog and contact technical support.
0xC0000010 An invalid IOCTL was sent to the driver.
Action: Save the system eventlog and contact technical support.
0xC0000013 Access to a virtual volume has been attempted after it has been destroyed.
Action: Do not access virtual volumes after they have been destroyed.
0xC000001C An invalid IOCTL was sent to the driver.
Action: Save the system eventlog and contact technical support.
0xC0000022 An access exception occurred.
Action: Save the system eventlog and contact technical support.
0xC0000022 You do not have sufficient rights to the cache file directory.
Action: Save the system eventlog and contact technical support.
0xC0000023 Specified buffer size is too small.
Action: Save the system eventlog and contact technical support.
0xC0000034 Cache file name is invalid.
Action: Save the system eventlog and contact technical support.
0xC000003A An invalid path was given for the cache file.
Action: Save the system eventlog and contact technical support.
0xC000003B An invalid path was given for the cache file.
Action: Save the system eventlog and contact technical support.
0xC000003E Bad sector was detected in the cache file.
Action: Save the system eventlog and contact technical support.
0xC0000043 A file cannot be opened because the share access flags are incompatible.
Action: This occurs when the very last snapshot is deleted. PSM initializes its
files when the last snapshot is deleted. While it is initializing, a new
snapshots can not be created. Try again in a few minutes.
0xC000009A There is insufficient memory available.
Action: Save the system eventlog and contact technical support.
0xC00000B5 I/O timed out while reading from the cache file.
Action: Save the system eventlog and contact technical support.
0xC00000BA The cache location must be a file rather than a directory.
Action: Save the system eventlog and contact technical support.
0xC00000E8 Invalid buffer address passed for I/O.
Action: Save the system eventlog and contact technical support.
Table 5: PSM Error Codes
Error Code Description
To Next Page
Loading...
