HP StorageWorks XP10000

Site requirements 21
Component weights
Table 3 provides approximate weights of additional disk array components.
The main factor accounting for total weight of the disk array racks is the
number of disk drives. Actual weight of the array racks is the minimum
rack weight plus the weight of all additional components installed.
Table 3. Component weights
Product Description kg lb
AE006A HP XP12000/10000 16-port 2-Gb FC CHIP 5.0 11.0
AE007A HP XP12000/10000 32-Port 2-Gb FC CHIP 5.8 12.8
AE008A HP XP12000/10000 FC SFP LW Transceiver 0.02 0.04
AE013A HP XP12000/10000 8-Port FICON SW CHIP 5.7 12.6
AE014A HP XP12000/10000 8-Port FICON LW CHIP 5.7 12.6
AE017A HP XP12000/10000 16-Port EXSA CHIP 5.4 11.9
AE018A HP XP12000/10000 8-Port 1-Gb NAS SW CHIP 6.5 14.3
AE025A HP XP12000/10000 4-GB Cache Memory 0.2 0.44
AE030A HP XP12000/10000 1-GB Shared Memory 0.06 0.13
AE102A HP XP10000 19" primary rack, disk controller, base disk
chassis for up to 60 HDDs, power supplies, base batteries for
up to 12GB cache and up to 3GB Shared Memory
335.5 740
AE104B HP XP10000 Disk Chassis 80.4 177
AE105B HP XP10000 16-Port FC SW CHIP 8-Port ACP 5.0 11.0
AE110B HP XP10000 Battery 8.0 17.6
AE115B HP XP10000 Second Rack Disk Array Frame - DKU 261 575
AE120A HP XP10000 73GB 15k rpm Array Group 4.4 9.7
AE120AS HP XP10000 73GB 15k rpm Spare Disk 1.1 2.4
AE121A HP XP10000 146GB 10k rpm Array Group 4 8.8
AE121AS HP XP10000 146GB 10k rpm Spare Disk 1 2.2
AE123B HP XP10000 300GB 10k rpm Array Group 4 8.8
AE123BS HP XP10000 300GB 10k rpm Spare Disk 1 2.2