EasyManua.ls Logo

HP StorageWorks XP10000 - Page 72

HP StorageWorks XP10000
80 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
72 HP StorageWorks XP10000 Disk Array Site Preparation Guide
The LUSE feature is available when the HP StorageWorks LUN
Configuration Manager product is installed.
ExSA Extended serial adapter.
failover Disconnecting a failed unit or path and replacing it with an alternative unit
or path in order to continue functioning.
FC Fibre Channel.
FC-AL Fibre Channel arbitrated loop.
FCP Fibre Channel Protocol.
fence level A level for selecting rejection of a write I/O request from the host according
to the condition of mirroring consistency.
FICON IBM mainframe Fiber Optic Connection.
GB Gigabytes.
GLM Gigabyte link module.
HA High availability.
HBA Host bus adapter. A built-in function or a card installed in a PC or other
host computer to enable connection of the host to the SAN.
host mode Each port can be configured for a particular host type. These modes are
represented as two-digit hexadecimal numbers. For example, host mode 08
represents an HP-UX host.
hot standby Using two or more servers as a standby in case of a primary server failure.
HP Hewlett-Packard Development Company.
I/O Input/output (applies to an operation or device).
LAN Local area network.
LD, LDEV Logical device. An LDEV is created when a RAID group is carved into
pieces according to the selected host emulation mode (that is, OPEN-3,
OPEN-8, OPEN-9). The number of resulting LDEVs depends on the
selected emulation mode. The term LDEV is often used synonymously
with the term volume.

Table of Contents

Other manuals for HP StorageWorks XP10000

Related product manuals