Figure 77 MSL2024 parallel SCSI tape drive default SCSI addresses
1. Tape drives with SCSI address 4
2. Tape drives with SCSI address 5
– MSL4048: For full-height tape drives the default SCSI address is 4. For half-height
drives, the default SCSI address for the bottom drive in each full-height drive bay
is 4 and the default SCSI address for the top drive is 5 as shown in “MSL4048
parallel SCSI tape drive default SCSI addresses” (page 135).
Figure 78 MSL4048 parallel SCSI tape drive default SCSI addresses
1. Tape drives with SCSI address 4
2. Tape drives with SCSI address 5
– MSL8048 and MSL8096: The default SCSI address for all tape drives is 4 as shown
in “MSL8048 and MSL8096 parallel SCSI tape drive default SCSI addresses”
(page 136).
Detection problems after installing a parallel SCSI drive 135
To Next Page
Loading...
